ntpe, rf058 series ntpe?j?c?gn?st?bh1 rf058?05sr3?05sr3?0100 www.samtec.com f-211 50 type specifications for complete speci cations and assembly instructions see www.samtec.com?ntpe shell material: brass contact material: brass (?), phosphor bronze (?) insulator material: ptfe center contact: soldered outer contact: crimped impedance: 50 frequency range: 0~3 ghz (cable dependent) v.s.w.r: 1.3 max working voltage: 1000 vrms max dielectric withstanding: 2500 vrms min contact resistance: center contact: 3m max outer contact: 2m max insulator resistance: 5,000 m min operating temp range: -65? to +125? gender plating type ?c10 = rg 58 cable (?p only) ?bh1 = bulkhead, rg 174 & rg 316 cable (?j only) ?gn = 10" (0,25m) gold on contact, nickel on body ?p = plug ?j = jack ?c = cable orientation ?st = straight termination ntpe ?p ?j rf058 end 1 connector overall length ??xxxx? = overall length in millimeters ?0100 (100mm) 3.94" minimum end 2 connector specify end options from chart xxxx = oal (millimeters) for complete speci cations see www.samtec.com? rf058 cable: 50 rg 58 (see rf cable selector for details) outer contact material: brass center contact material: brass (?), phosphor bronze (?) insulator material: ptfe impedance: 50 frequency range: 0~1 ghz working voltage: 1000 vrms max (n-type), 500 vrms max (tnc) dielectric withstanding: 2500 vrms min (n-type), 1500 vrms min (tnc) contact resistance: center contact: 3m max outer contact: 2m max insulator resistance: 5,000 m rohs compliant: ye s specifications also available ?connector kits. ?additional plating options. ?additional end connector options. call samtec. ?06sp3?sing shown (22,00) .866 (28,85) 1.136 (21,00) .827 dia over knurl (35,80) 1.410 supplied with pins, washers, nuts, gaskets and ferrules. see website for dimensions. end options ?05sr3 = tnc, reversed polarity straight plug (10? (0,25?) gold on center contact, nickel on shell) ?06sp3 = n type, straight plug (10? (0,25?) gold on center contact, nickel on shell) ?sing = single ended (end 2 callout) ?xxxxxx = stripped & tinned (end 2 callout) (21,00) .827 dia (14,50) .571 a b c mates with: tnc stripped & tinned (dimensions in mm) both center conductor and braid shield are stripped, only the center conductor is tinned. call samtec for other sizes or tinning options. callout ?303030 ?303040 ?403030 ?403040 ?404040 a 3.0 3.0 4.0 4.0 4.0 b 3.0 3.0 3.0 3.0 4.0 c 3.0 4.0 3.0 4.0 4.0
|
